1st gen 1969 Ford Mustang Mach 1 390 S Code 4spd Project For Sale

Vehicle Detail

1st gen 1969 Ford Mustang Mach 1 390 S Code 4spd Project For Sale.

1969 Mustang Mach 1 390 S Code 4spd Project
Only 10,464 out of 299,842 1969 Mustang were 390 S Codes. Lowest production year of 390s for Mustangs. Not to mention the highly desired Mach 1 4spd combo package in Acapulco Blue. This is a life-long Eastern WA car that needs a full restoration. An absolute rare gem.

I have owned the car since June 2021 with plans to restore it. However, I am focusing on family and other endeavors, so I am parting ways with it. Mustang has only been in stored in the garage since I have owned it.
Priced accordingly to condition.

Mustang – See Marti Report in Photos
Clean Title
390 S-Code 325hp – Period Correct block – aftermarket intake. Rebuilt year ago.
4-spd Wide Ratio Toploader – Original including shifter lever, clutch pedals, fly wheel and other components
Acapulco Blue w/ Black Out Hood
3.25 Conventional gear (read end rebuilt)
Power Front Disk Brakes
Sport Deck Rear Seat (Still have the factory one – rare option)
AM/8 Track Stereo – Does not include

Videos of Mustang:
*Walk Around – Body: https://youtu.be/jo4tgP_7aHM
*Front End: https://youtube.com/shorts/rNI4C3lAuew
*Trunk & Read End: https://youtube.com/shorts/ZvNICrf1kkk
*Inside Car and Floord: https://youtube.com/shorts/BtWc9uwwfkA
* Under Carriage: https://youtu.be/Or0FCe1f3L8
*Body Parts and DriveTrain: https://youtube.com/shorts/lyasCCIpV1o
* Parts – Interior and Misc: https://youtu.be/KfUCstuZNbc
* Misc Interior, Trim, etc: https://youtube.com/shorts/R6_BiV3kxJ4

Body – Major Components
Needs full restoration. I have all the major components – Fenders, Hood (with Scoop), Doors (w/ hinges), Front and Rear Lights, Grill, front and rear valance, etc. in good condition to restore. Metal in good shape. Body Work overall needed. Some patch work done.
Front End Rebuilt w/ new sheet metal.
Trunk pan and tail light panel new
Rear quarter panel needs replaced. I have purchased a Dynacorn Full Driver Side Quarter Panel ($549+tax) for replacement (I stopped the build after restorer cut in as I no longer wanted to move forward with the project. I have photos when I purchased it when it wasn’t cut to prove timeline)
Bumpers – I have both that came with the car (including Fog Lights & brackets). purchased two new bumpers with new inner bracket assemblies)
Glass – I have all the glass, including windshield. All factory glass except windshield.
Doors: Still have with all the internal components for each door bagged up individually.
Floor Boards and Frame – No Rust (see walkaround video). There are two patches (Driver side and Passenger side) where I purchased floor to firewall extension panel.
Wheel Moldings – Purchased new set from CJ Pony
Trim and Pot Metal – I have some of the trim, not all. Will need all replaced.
New Battery Stand
Rear Window Louvers
Rear Spoiler
New Hood Hinges
Interior – Major Components
Bucket seats and rear seat with brackets still have
New Dash Pad (in wrapper)
Factory Dash Gauges and Clock
Headliner Ribs (still have – no headliner)
New Carpet Kit
New Wire Harness
Heaterbox – Factory

Underneath – Major Component
New Gas Tank
New Factory Radiator (correct 390 manual radiator)
New Front End Suspension, Springs and Shocks
Steering Box Rebuilt
New Brake Booker
New Brake Lines
Wheel Wells pretty clean
Needs new tires and rims

$18,500

Send inquiry to contact the owner of this Mustang.

Car located in – Yakima, Washington, US.